No KYC · Android in the cloud, on 24/7 · Pay in BTC, USDT, USDC, ETH, SOL, LTC, XMR
Rent a phone

Guide · scrcpy · commands from github.com/Genymobile/scrcpy, checked 16 November 2026

How do you mirror a cloud phone with scrcpy?

Last updated: · 4 min read

Quick answer

How do you mirror a cloud phone with scrcpy?

Install scrcpy from its official GitHub page, then run scrcpy --tcpip=host:port with your cloud phone's ADB host and port. Over the internet, add --max-size=1024 --video-bit-rate=2M --max-fps=30 to keep the picture smooth. On a Droidkeep phone (Android 12) scrcpy also forwards audio, and needs no root and no app on the phone.

In brief
  • What scrcpy is: a free, open-source tool by Genymobile that shows and controls an Android screen over ADB; version 5.0.1 on 16 November 2026.
  • Needs: Android 5.0 (API 21) or later; audio needs Android 11 or later. Android 12 meets both.
  • One command: scrcpy --tcpip=host:port connects ADB and opens the window.
  • Over the internet: lower the size, bit rate and frame rate; the default bit rate is 8 Mbps.

How do you set it up, step by step?

Five steps from the scrcpy documentation. Replace host:port with the ADB values posted with your Droidkeep phone.

  1. Install scrcpy

    Follow the Windows, macOS or Linux page linked from github.com/Genymobile/scrcpy. The project warns not to download releases from other websites.

  2. Check ADB

    scrcpy uses adb. Run adb connect host:port once and check adb devices shows device; the ADB guide covers errors.

  3. Start the mirror

    Run scrcpy --tcpip=host:port. If ADB is already connected, scrcpy -s host:port does the same.

  4. Tune for your connection

    If the picture stutters, restart with --max-size=1024 --video-bit-rate=2M --max-fps=30, then lower further if needed.

  5. Close the window

    Closing scrcpy stops the mirror only. The phone keeps running.

Mirror a cloud phone over the internet
adb connect host:port
scrcpy -s host:port --max-size=1024 --video-bit-rate=2M --max-fps=30

# watch only, no input sent to the phone
scrcpy -s host:port --no-control

# no sound
scrcpy -s host:port --no-audio

Which scrcpy options matter on a cloud phone?

Size, bit rate and frame rate decide how much bandwidth the mirror uses. All options below are from the scrcpy documentation.

scrcpy options useful for a cloud phone reached over the internet, from the official scrcpy documentation
OptionWhat it doesSuggested start over the internet
--max-size=1024 (-m 1024)Limits width and height, keeping the aspect ratio1024, or 800 on a slow link
--video-bit-rate=2M (-b 2M)Sets the video bit rate; default 8 Mbps2M, or 1M on a slow link
--max-fps=30Caps the frame rate30, or 15 for idle games
--video-codec=h265Uses H.265 instead of H.264Try it if the picture is blurry at a low bit rate
--no-audioTurns off audio forwardingUse it if you do not need sound
--no-control (-n)Read-only: no keys, mouse or file drops sentUse it to watch a running job

Why mirror with scrcpy instead of the browser screen?

For the keyboard, the clipboard and file drops. scrcpy runs as a desktop window. It forwards your keyboard, syncs the Android clipboard to your computer, and installs an APK when you drag it onto the window. Other files dropped on the window go to /sdcard/Download/.

The browser screen needs nothing installed and works from any device. Use scrcpy at your desk, the browser elsewhere. Both connect to the same phone. The APK guide covers installs from the command line.

What if the mirror is slow or freezes?

Lower the bit rate and size first; then check ADB. A picture that blurs or lags usually means the link cannot carry the default 8 Mbps. Restart with -b 2M -m 1024, then -b 1M -m 800.

If the window closes or freezes, run adb devices. If the state is offline, reconnect with adb connect host:port. If the phone stays unreachable, the phone not responding page lists the next steps.

Is scrcpy safe to use with a cloud phone?

Yes, if you guard the ADB host and port and avoid pasting secrets. scrcpy installs nothing permanent on the phone. Its documentation warns that text pasted from your computer lands in the Android clipboard, where other apps could read it, so do not paste passwords that way.

According to Droidkeep's survey of 16 November 2026, GeeLark was the only one of 8 sellers to list ADB on its price page. Droidkeep includes ADB, and so scrcpy, on every plan. The ADB cloud phone page lists the other tools that work.

scrcpy questions

Does scrcpy need root on the cloud phone?

No. The scrcpy project states it needs neither root nor an app installed on the device.

Does audio work?

Yes on Android 11 and later, so on a Droidkeep phone (Android 12). Use --no-audio to save bandwidth.

Can I record the screen?

Yes: add --record=file.mp4. The file is saved on your computer.

Can I mirror several phones at once?

Yes. Run one scrcpy per phone, each with its own -s host:port.

Does scrcpy work on macOS and Linux?

Yes. The project publishes install pages for Windows, macOS and Linux.

Verdict
  • scrcpy --tcpip=host:port gives a desktop window of your cloud phone with keyboard, clipboard and drag-and-drop installs.
  • On a home connection, start at -m 1024 -b 2M --max-fps=30 and adjust.
Sources (4)
  1. scrcpy — Genymobile (read 2026-11-16)
  2. scrcpy: connection — Genymobile (read 2026-11-16)
  3. scrcpy: video — Genymobile (read 2026-11-16)
  4. scrcpy: control — Genymobile (read 2026-11-16)

A phone to mirror

ADB on every Droidkeep plan, so scrcpy works from day one.

From $0.08/day · no KYC

Rent a phone